CP2103 GMR

1. 제품명

CP2103 GMR



2. 제품소개

기존의 CP2102의 최신칩, 가장큰특징은 칩안에 4개의 범용 I/O핀을 사용할수 있습니다.(GPIO) 4개의 범용 I/O를 사용하여 Tx,Rx LED를 켜거나,RS485 셀렉터등 할수 있습니다.




3. 제품특징

• CP2103 데이터시트 다운로드
• CP2103 USB 드라이버 다운로드
  - Windows2000 driver (Download)
  - Windows XP, 2003, Vista, 7 driver (Download)
  - Linux driver (Download)
  - Windows CE 5.0 driver (Download)
  - Windows CE 6.0 driver (Download)
  - Max OS8 & 9 driver (Download)

• Single-Chip USB to UART Data Transfer
  - Integrated USB transceiver; no external resistors required
  - Integrated clock; no external crystal required
  - Integrated 1024-Byte EEPROM for vendor ID, product
  
• ID, serial number, power descriptor, release number, and product description strings
  - On-chip power-on reset circuit
  - On-chip voltage regulator: 3.3 V output USB Function Controller
  - USB Specification 2.0 compliant; full-speed (12 Mbps)
  - USB suspend states supported via SUSPEND pins Asynchronous Serial Data BUS (UART)
  - All handshaking and modem interface signals
  - Data formats supported:
   · Data bits: 5, 6, 7, and 8
   · Stop bits: 1, 1.5, and 2
   · Parity: odd, even, mark, space, no parity
  - Baud rates: 300 bps to 1 Mbits
  - 576 Byte receive buffer; 640 byte transmit buffer
  - Hardware or X-On/X-Off handshaking supported
  - Four GPIO signals for status and control
  - Configurable I/O (1.8 V to VDD) using VIO pin
  - Configurable I/O (VDD to 5 V) using external pull-up
  - RS-485 mode with bus transceiver control Virtual COM Port Device Drivers
  - Works with existing COM Port PC applications
  - Royalty-free distribution license
  - Windows 98 SE/2000/XP
  - MAC OS-9
  - MAC OS-X
  - Linux 2.40
  
• USBXpress™ Direct Driver Support Example Applications
  - Upgrade of RS-232 legacy devices to USB
  - Upgrade of RS-485 legacy devices to USB
  - Cellular phone USB interface cable
  - PDA USB interface cable
  - USB to RS-232 serial adapter
  
• Supply Voltage
  - Self-powered: 3.0 to 3.6 V
  - USB bus powered: 4.0 to 5.25 V
  - I/O voltage: 1.8 V to VDD