안드로이드 S3C6410 Startkit Core Board
2. 제품소개
ARM11 Core를 내장한 삼성전자의 S3C6410 MCU를 탑재 하였고Windows CE 6.0 BSP 소스 및 Linux 2.6.38 커널의 전체 BSP소스,
안드로이드(Android) 2.2, 2.3 BSP 소스 코드와 모든 장치 드라이버 소스 또한 포함 되어 있습니다.
USB Bluetooth, TV OUT, CMOS Camera, SDIO Wi-Fi, GPS, WCDMA 등의 다양한 주변 장치의 드라이버 및 예제 코드를 지원하고 있습니다.
제품 구매 : http://www.toolparts.co.kr
3. 제품사양( 하드웨어 부분 )
Hardware Features - Core Board | |
CPU | Samsung S3C6410A, run at 533MhzARM1176JZF-S, up to 667Mhz |
DDR RAM | 256M DDR RAM |
NAND Flash | 128/256M/512M/1GB Nand Flash, default: 256M |
Interface | 4 x User Leds 10 pin 2.0mm space Jtag connector Reset button on board |
Connector | 2 x 60 pin 2.0mm space DIP connector |
Power Supply | Supply Voltage from 4.75V to 5.25V |
JTAG | 10 Pin JTAG interface |
Size | 64 x 50 x 12mm (L x W x H) |
Hardware Features - Optional Module | |
Wi-Fi | SDIO Wi-Fi ( Optional 구매하기 ) |
3G CDMA USB Modem | USB Type 데이터통신 전용 (테스트 중) |
Bluetooth Module | USB Type ( Optional 구매하기 ) |
GPS Module | Serial Interface( Optional 구매하기 ) |
VGA Out | 1024 * 768 해상도( Optional 구매하기 ) |
1.3M CMOS Camera | 20Pin CMOS Camera( Optional 구매하기 ) |
코어 모듈에 대한 핀맵 및 회로도에 대한 자세한 정보는 하드웨어 상세 사양서 및 회로도 를 참조하시기 바랍니다.
4. 제품사양( 소프트웨어 부분 )
Software Features - Linux |
Kernel version |
- Linux 2.6.36 |
Boot program (BootLoader) |
- U-boot-1.6.1 : Nand and SD start 소스코드 제공 |
Supported file systems |
- Yaffs2: read-write file system, recommended - UBIFS: read-write file system, recommended - Cramfs: compressed read-only file system, data is not recommended for online updates |
Drivers |
- 4 standard serial port driver - DM9000 driver - Audio driver (WM9714) - RTC driver (which can save time, power-down) - 4 user LED driver - USB Host driver - LCD Driver (supports 4.3", 7 ", LCD2VGA1024x768, LCD2VGA640x480, EZVGA800x600 display driver, etc.) - Four-wire touch screen driver - Precision Touch line driver - Free universal USB drive camera driver - USB wireless network card driver - USB 3G network card driver - SD WiFi driver - USB keyboard and mouse driver, USB flash drives, mobile hard disk - SD card driver that can support high-speed SD card, the maximum capacity of up to 32G - I2C-EEPROM - LCD backlight driver - Watchdog drivers (the equivalent of the cold reset the watchdog reset) - Multimedia drive (including Jpeg, fimc, MFC, 2D/3D acceleration, TVENC, TVSCALER, CMOS cameras) (No source code) - SPI driver - ADC driver |
Basic Application |
- Busybox1.17 (Linux tool set, including the common Linux commands, etc.) - Telnet, Ftp, inetd (Internet remote access tools and services) - Boa (web server) - Madplay: console-based mp3 player with ALSA Interface - Snapshot (screenshot of console-based software) - Ifconfig, ping, route, etc. (commonly used Internet tools command) - USB WiFi Kits: USB Wireless Network tools |
GUI support |
- Qtopia-2.2.0 : Provide a platform for the source code, divided into two versions of x86 and arm - QtE-4.7.0 : Source code to provide a platform for the arm version - Qt-extended -4.4.3 : mobile phone version of Qtopia, also known as Qtopia4, providing a platform source code - Support SD card automatically mount and umount - Support for USB mouse |
Cross compiler |
- Arm-none-linux-gnueabi-4.5.1: Defaults armv6 instruction set, hardware floating point support |
Software Features - Windows CE6.0 R3 |
Version |
- WindowsCE Embedded 6.0 |
BSP features |
- Support fast boot (15 seconds) - Support OS update via SD card or USB interface - CMOS Camera Driver - LED Driver - 8 button driver - PWM control buzzer driver - LCD Driver (supports 4.3", 7", LCD2VGA1024x768, LCD2VGA640x480, EZVGA800x600 ) - RTC driver - DM9000 network card driver - Large capacity high speed SD card driver - Touch Screen Driver - Audio input and output drivers: Based on the WM9714 chip - USB keyboard, USB mouse, and so drive - Serial driver: Currently, only COM2, 3, 4 tested - Multimedia driver (including Jpeg, fimc, 2D/3D acceleration, MFC, TVENC, TVSCALER, etc.) - Support for USB WiFi plug and play - Support plug and play USB Bluetooth |
Software features |
- Easy to use serial Assistant |
Software Features - Android 2.2, 2.3 System |
Linux kernel version |
- Linux-2.6.36 |
Cross compiler |
- Arm-linux-gcc 4.5.1, the default use of armv6 instruction set, hardware floating point support |
Bootloader |
- U-boot-1.6.1 : Nand and SD start 소스코드 제공 |
Supported file systems |
- FAT32: Support FAT32/FAT format, USB and SD card, SDHC card - YAFFS2: Support for downloading via USB or SD card file system image to install YAFFS2 - UBIFS: Support for downloading via USB or SD card file system image to install UBIFS - EXT3: Support SD card from the EXT3 file system image running |
Android system version and features |
- Android 2.2 and Android 2.3 - Support Backlight adjustable driver - Supports plug and play USB Bluetooth - Supports USB plug and play - Support for SD-WiFi wireless Internet access - Support for GPS Positioning - Support for audio adjustment status bar, Back button, convenient and direct touch-screen operation - SD Card Plug and Play |
Software Features - Ubuntu System |
Linux kernel version |
- Linux-2.6.36 |
Bootloader |
- Superboot: support directly from the SD card to load the kernel and file system running |
Supported file systems |
- FAT32: Support FAT32/FAT format, USB and SD card, SDHC card - EXT2/3: Support SD card from the EXT3 file system image running - UBIFS: Support SD card file system image to install UBIFS |
5. 제품 구성
(1) S3C6410 ARM11 코어모듈
(2) 전체 소스및 회로도 DVD-ROM
댓글 없음:
댓글 쓰기