안드로이드 S3C6410 StartKit 4.3 Fullset
2. 제품소개
ARM11 Core를 내장한 삼성전자의 S3C6410 MCU를 탑재 하였고 4.3인치 터치 LCD를 기본으로 포함하고 있습니다.
Windows CE 6.0 BSP 소스 및 Linux 2.6.38 커널의 전체 BSP소스, 안드로이드(Android) 2.2, 2.3 BSP 소스 코드와
모든 장치 드라이버 소스 또한 포함 되어 있습니다. USB Bluetooth, TV OUT, CMOS Camera, SDIO Wi-Fi, GPS,
WCDMA 등의 다양한 주변 장치의 드라이버 및 예제 코드를 지원하고 있습니다.
제품 구매 : http://www.toolparts.co.kr
| 개발자 메뉴얼 및 소프트웨어 업데이트 소식 | ||
| 하드웨어 상세 사양서 및 회로도 |  | 하드웨어 회로도에 대한 설명과 디바이스에 대한 설명 |
| 리눅스 개발자 가이드 |  | 리눅스 커널 컴파일등 포팅에 관한 메뉴얼 |
| 안드로이드 개발자 가이드 |  | 안드로이드 커널 컴파일등 포팅에 관한 메뉴얼 |
| Windows CE 6.0 개발자 가이드 |  | Windows CE 6.0 R3 커널 컴파일등 포팅에 관한 메뉴얼 |
3. 제품사양( 하드웨어 부분 )
| Hardware Features - Core Board | |
| CPU | Samsung S3C6410A, run at 533MhzARM1176JZF-S, up to 667Mhz |
| DDR RAM | 256M DDR RAM |
| NAND Flash | 128/256M/512M/1GB Nand Flash, default: 256M |
| Interface | 4 x User Leds 10 pin 2.0mm space Jtag connector Reset button on board |
| Connector | 2 x 60 pin 2.0mm space DIP connector |
| Power Supply | Supply Voltage from 4.75V to 5.25V |
| JTAG | 10 Pin JTAG interface |
| Size | 64 x 50 x 12mm (L x W x H) |
| Hardware Features - Base Board | |
| Multimedia | Support for Mpeg4, H.264, H.263, VC1 hardware decoding, up to 30fps@SD |
| 3D | 3D hardware acceleration support |
| Debug Port | COM0 + JTAG + USB Slave |
| Wi-Fi | SDIO Wi-Fi 기본 포함 |
| 3G CDMA USB Modem | USB Type 데이터통신 전용 (테스트 중) |
| Bluetooth Module | USB Type 기본 포함 |
| GPS Module | Serial Interface 기본 포함 |
| VGA Out | 1024 * 768 해상도 기본 포함 |
| 1.3M CMOS Camera | 20Pin CMOS Camera 기본 포함 |
| LED | 4 x User LED (in the core board), 1 x Power LED |
| Test Button | 8 x User Buttons, interrupt-style buttons |
| USB | 1 x mini USB Slave 1 x Host |
| Network Interface | 10/100M MB Ethernet, RJ-45 interfaces |
| Audio | 3.5mm input and output ports |
| SD Card | Normal SD card connector |
| Serial | 3 x RS232 DB9 serial port, 4 x TTL-level |
| TV-OUT | 1 x RCA output |
| SDIO2 Interface | SD WiFi module (also includes SPI, I2C interface) |
| LCD Interface | 2 LCD Interface Block(0.5mm pitch SMT, 2.0mm pitch) 4.3" Touch LCD(480*272) Included |
| Buzzer | 1 x PWM control the buzzer output |
| IRDA | 1 channel infrared receiver |
| Temperature Sensor | DS18B02 Temperature Sensor |
| ADC | An adjustable resistor, connected CPU's AD0 channel |
| RTC | On-board battery backup RTC clock |
| PCB Size | 180 x 130 mm |
| Power Supply | 5V DC |
4. 제품사양( 소프트웨어 부분 )
| Software Features - Linux |
| Kernel version |
| - Linux 2.6.36 and Linux 2.6.38 |
| Boot program (BootLoader) |
| - U-boot-1.6.1 : Nand and SD start 소스코드 제공 |
| Supported file systems |
| - Yaffs2: read-write file system - UBIFS: read-write file system, recommended - Ext3 : read-write file system( for SD Boot) - Cramfs: compressed read-only file system, data is not recommended for online updates |
| Drivers |
| - 4 standard serial port driver - DM9000 driver - Audio driver (WM9714) - RTC driver (which can save time, power-down) - 4 user LED driver - USB Host driver - LCD Driver (supports 4.3", 7 ", LCD2VGA1024x768, LCD2VGA640x480, EZVGA800x600 display driver, etc.) - Four-wire touch screen driver - Precision Touch line driver - Free universal USB drive camera driver - USB wireless network card driver - USB 3G network card driver - SD WiFi driver - USB keyboard and mouse driver, USB flash drives, mobile hard disk - SD card driver that can support high-speed SD card, the maximum capacity of up to 32G - I2C-EEPROM - LCD backlight driver - Watchdog drivers (the equivalent of the cold reset the watchdog reset) - Multimedia drive (including Jpeg, fimc, MFC, 2D/3D acceleration, TVENC, TVSCALER, CMOS cameras) (No source code) - SPI driver - ADC driver |
| Basic Application |
| - Busybox1.17 (Linux tool set, including the common Linux commands, etc.) - Telnet, Ftp, inetd (Internet remote access tools and services) - Boa (web server) - Madplay: console-based mp3 player with ALSA Interface - Snapshot (screenshot of console-based software) - Ifconfig, ping, route, etc. (commonly used Internet tools command) - USB WiFi Kits: USB Wireless Network tools |
| GUI support |
| - Qtopia-2.2.0 : Provide a platform for the source code, divided into two versions of x86 and arm - QtE-4.7.0 : Source code to provide a platform for the arm version - Qt-extended -4.4.3 : mobile phone version of Qtopia, also known as Qtopia4, providing a platform source code - Support SD card automatically mount and umount - Support for USB mouse |
| Cross compiler |
| - Arm-none-linux-gnueabi-4.5.1: Defaults armv6 instruction set, hardware floating point support |
| Software Features - Windows CE6.0 R3 |
| Version |
| - WindowsCE Embedded 6.0 R3 |
| BSP features |
- Support fast boot (15 seconds) - Support OS update via SD card or USB interface - CMOS Camera Driver - LED Driver - 8 button driver - PWM control buzzer driver - LCD Driver (supports 4.3", 7", LCD2VGA1024x768, LCD2VGA640x480, EZVGA800x600 ) - RTC driver - DM9000 network card driver - Large capacity high speed SD card driver - Touch Screen Driver - Audio input and output drivers: Based on the WM9714 chip - USB keyboard, USB mouse, and so drive - Serial driver: Currently, only COM2, 3, 4 tested - Multimedia driver (including Jpeg, fimc, 2D/3D acceleration, MFC, TVENC, TVSCALER, etc.) - Support for USB WiFi plug and play - Support plug and play USB Bluetooth |
| Software features |
- Easy to use serial Assistant |
| Software Features - Android 2.2, 2.3 System |
| Linux kernel version |
| - Linux-2.6.38 |
| Cross compiler |
| - Arm-linux-gcc 4.5.1, the default use of armv6 instruction set, hardware floating point support |
| Bootloader |
| - U-boot-1.6.1 : Nand and SD start 소스코드 제공 |
| Supported file systems |
| - FAT32: Support FAT32/FAT format, USB and SD card, SDHC card - YAFFS2: Support for downloading via USB or SD card file system image to install YAFFS2 - UBIFS: Support for downloading via USB or SD card file system image to install UBIFS - EXT3: Support EXT3 file system image running on SD card |
| Android system version and features |
| - Android 2.2 and Android 2.3 - Support Backlight adjustable driver - Supports plug and play USB Bluetooth - Supports USB plug and play - Support for SD-WiFi wireless Internet access - Support for GPS Positioning - Support for audio adjustment status bar, Back button, convenient and direct touch-screen operation - SD Card Plug and Play |
| Software Features - Ubuntu System |
| Linux kernel version |
| - Linux-2.6.36 |
| Bootloader |
| - Superboot: support directly from the SD card to load the kernel and file system running |
| Supported file systems |
| - FAT32: Support FAT32/FAT format, USB and SD card, SDHC card - EXT2/3: Support SD card from the EXT3 file system image running - UBIFS: Support SD card file system image to install UBIFS |
* 다음 주변장치들이 모두 포함되어 있습니다. --> 각각 등록될 제품으로 링크를 걸어 주세요.
 |  |  |  |  |
USB Bluetooth | SDIO Wifi | 1.3 CMOS Camera | VGA Out | GPS(Serial) |
5. 제품 구성
(1) S3C6410 ARM11 코어모듈
(2) S3C6410 베이스 보드
(3) 4.3Inch 터치 LCD(480*272)
(4) USB Bluetooth
(5) SDIO Wifi
(6) 1.3 CMOS Camera
(7) VGA Out 모듈
(8) GPS 시리얼 모듈
(9) Touch Pen
(10) Serial Cross Cable
(11) USB Mini Cable
(12) RJ-45 Cross Network Cable
(13) 5V@2A Power Adapter
(14) 전체 소스및 회로도 DVD-ROM
(15) 알루미늄 가방 및 아크릴 케이스
댓글 없음:
댓글 쓰기