툴파츠: ARM9

레이블이 ARM9인 게시물을 표시합니다. 모든 게시물 표시

2011년 2월 27일 일요일

ST-Link(ST 정품)

1. 제품명

ST-Link(ST 정품)

2. 제품소개
ST-Link는 ST Microelectronics의 STM8 and STM32microcontroller families의 모든 제품에 사용 가능한
in-circuit debugger and programmer 입니다. JTAG/SWD인터페이스를 이용해서 STM8 and STM32에
플래시 Write와 디버깅을 할 수 있습니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품특징
* 5 V power supplied by USB connector.
* USB 2.0 full speed interface compatible.
* USB standard A to Mini-B cable provided.
* SWIM specific features:
  1.65 V to 5.5 V application voltage supported on SWIM interface.
  SWIM low speed and high speed modes supported.
  SWIM programming speed rate:
* 9.7 Kbytes/s in low speed,
* 12.8 Kbytes/s in high speed.
  SWIM cable for connection to an application with an ERNI standard connector
  vertical (ref: 284697 or 214017) or horizontal (ref: 214012).
  SWIM cable for connection to an application with pin headers or 2.54 mm pitch connector.
* JTAG/SWD specific features:
  3 V to 3.6 V application voltage supported on JTAG/SWD interface and 5Vtolerant inputs.
  JTAG/SWD cable provided for connection to a standard JTAG 20-pin pitch2.54 mm connector.
* Direct firmware update feature supported (DFU).
* Status LED which blinks during communication with PC.
* Operating temperature 0 to 50 °C.
* JTAG cable connection

Pin No	Name	ST-LINK Funciton	Target connection
1	TVCC	Target VCC	MCU VCC
2	TVCC	Target VCC	MCU VCC
3	TRST	GROUND	GND
4	UART-RX	Unused	GND or not connected
5	TDI	JTAG TDI	TDO
6	UART-TX	Unused	GND or not connected
7	TMS	JTAG TMS, SW IO	TMS, SWIO
8	BOOT0	Unused	GND or not connected
9	TCK	JTAG TCK, SW CLK	TCK, SWCLK
10	SWIM	Unused	GND or not connected
11	NC	not connected	not connected
12	GND	GROUND	GND
13	TDO	JTAG TDO	TDI
14	SWIM-RST	Unused	GND
15	RESET	RESET	RESET (optional)
16	KEY	not existing pin	not connected
17	NC	not connected	not connected
18	GND	GROUND	GND
19	VDD	VDD (3.3V)	not connected
20	GND	GROUND	GND

4. 지원하는 디버그 소프트웨어
(1) KEIL MDK, IAR Workbench

5. 메뉴얼
ST-Link 사용자 메뉴얼

6. 제품 구성
(1) ST-Link 1Ea
(2) USB Cable 1Ea
(3) SWIM separate-wires cable 1Ea
(4) USB Driver/Software, CD

RLink Standard

1. 제품명

RLink Standard

2. 제품소개
RLink 는 STR7(ARM7), STR9(ARM9), uPSD(8051) and Cortex-M3(STM32)를 위한
In-Circuit Debugger & Programmer 입니다. Raisonance's Integrated Environment(RIDE) 환경에서 사용 가능 합니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품특징
* Dynamically programmable: possible addition of new protocols without changing the hardware nor the firmware but only the software
* Up to 2 Mbit/s, from 3V to 5V
* Flexible software architecture (supports also various 8 bit cores)
* No power supply needed. RLink is powered through the USB connection
* Cost effective solution
* Full programming without any limitation
* Full debugging up to 32KB debugging

4. 메뉴얼
RLink 사용자 메뉴얼

5. 제품 구성
(1) RLink Standard 1Ea
(2) USB Cable 1Ea
(3) USB Driver/Software, CD
   The CD includes:
   * RKit-ARM (STR7, STR9 & STM32) software tools (GNU C Compiler, GNU assembler, GNU Linker and Raisonance Simulator/Debugger)
   * Ride7 (new Raisonance Integrated Development Environment) drives RLink and integrates the different software tools for STRx, STM32
   * RFlasher: stand-alone programming tool that drives RLink

J-Link EDU(Segger 정품)

1. 제품명

J-Link EDU(Segger 정품)

2. 제품소개
J-Link EDU제품은 판매를 위한 상업적인용도로 사용하지 않는다는 라이센스 하에서
J-LInk V8 제품과는 기능이 완벽하게 동일한 제품으로 개인용, 교육적인 목적으로만 사용한다는 조건으로
Segger사에서 새롭게 출시된 정품 에뮬레이터 입니다. IAR Workbench, Keil MDK 등에서 사용 가능 합니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품특징
* Direct download into flash memory of most popular microcontrollers supported
* USB 2.0 interface
* Supported CPUs: Any ARM7/9/11, Cortex-A5/A8, Cortex-M0/M1/M3/M4, Cortex-R4
* Serial Wire Debug (SWD) support
* Serial Wire Viewer (SWV) support
* Automatic core recognition
* JTAG speed up to 12 MHz
* Download speed up to 720 Kbytes/second (ARM7 @ 50 MHz, 12MHz JTAG speed)
* Seamless integration into the IAR Embedded Workbench IDE
* No power supply required, powered through USB
* Support for adaptive clocking
* All JTAG signals can be monitored, target voltage can be measured
* Support for multiple devices
* Fully plug and play compatible
* Standard 20-pin JTAG connector
* Wide target voltage range: 1.2V - 3.3V, 5V tolerant
* USB and 20-pin ribbon cable included
* Memory viewer (J-Mem) included
* RDI interface available, which allows using J-Link with RDI compliant software
* Flash programming software (J-Flash) available
* Flash DLL available, which allows using flash functionality in custom applications
* Software Developer Kit (SDK) available
* Embedded Trace Buffer (ETB) support
* 14-pin JTAG adapter available
* Optical isolation adapter available
* Target power supply: J-Link can supply up to 300 mA to target with overload protection

General	Support OS	Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64
	Electromagnetic compatibility (EMC)	EN 55022, EN 55024
	Operating temperature	+5°C ... +60°C
	Storage temperature	20°C ... +65 °C
	Relative humidity (non-condensing)	Max. 90% rH
Mechanical	Size (without cables)	100mm x 53mm x 27mm
Mechanical	Weight (without cables)	70g
Interfaces	USB interface	USB 2.0, full speed USB powered, Max. 50mA + Target Supply current
Interfaces	Target interface	JTAG 20-pin (14-pin adapter available)

5. 지원하는 디버그 소프트웨어
(1) IAR Workbench, KEIL MDK
(2) 그밖의 RDI 인터페이스를 지원하는 모든 디버그 환경

6. 제품 구성
(1) J-Link EDU 1Ea
(2) USB Cable 1Ea
(3) USB Driver/Software, CD

H-JTAG USB Standard

1. 제품명

H-JTAG USB Standard

2. 제품소개
H-JTAG USB 제품은 ARM Core(S3C2440, , XScale, Cortex-M3)등을 위한 디버깅 및 플래시
프로그램이 가능한 USB JTAG 에뮬레이터 제품 입니다. H-JTAG 의 사용법 및 성능은
MULTI-ICE 제품과 유사하며 SDT2.51, ADS1.2, KEIL RVDS, MDK and IAR(EWARM 5.11 이상) 등과 같은
대부분의 인기 있는 개발 환경에서 ARM7/ARM9/Cortex-M3 코어의 디버깅 및 플래시
프로그램을 할 수 있습니다

제품 구매 : http://www.toolparts.co.kr

3. 제품특징
(1) Support RDI 1.5.0 and 1.5.1
(2) Support ARM7, ARM9, ARM11, XSCALE and CORTEX-M3
(3) Support both THUMB and ARM instructions
(4) Support both Little-Endian, Big-Endian
(5) Support SEMIHOSTING
(6) Support 2000/XP/VISTA/Windows 7
(7) USB2.0 고속 인터페이스 및 USB전원 공급
(8) JTAG Clock : 10K ~ 15MHz
(9) JTAG 읽기 및 쓰기속도
    ARM7 : Read - 750KB/sec, Write - 550KB/sec
    ARM9 : Read - 750KB/sec, Write - 520KB/sec
    CORTEX-M3 : Read - 420KB/sec, Write - 340KB/sec

H-JTAG Edition		Light	Standard	Professional
Speed	Download	LPT x 5	750 KB/S	750 KB/S
Speed	Upload	LPT x 5	550 KB/S	550 KB/S
ARM Core	ARM-7	YES	YES	YES
	ARM-9	YES	YES	YES
	CORTEX-M3	YES	YES	YES
	XSCALE	NO	YES	YES
	ARM11	NO	NO	YES
	PXA3XX	NO	NO	YES
Support IDE		ADS1.2, RVDS, KEIL/MDK, IAR
Support OS		WIN2000 / XP / VISTA / WINDOWS 7

4. 지원디바이스

Samsung (ARM7/ARM9/Cortex-M3 Family)
S3C2410A, S3C2440A, S3C44B0X, S3C4510B

STMicroelectronics (ARM7/ARM9/Cortex-M3 Family)
STR710FZ1, STR710FZ2, STR711FR0, STR711FR1, STR711FR2,
STR712FR0, STR712FR1, STR712FR2, STR715FR0, STR730FZ1, STR730FZ2, STR731FV0, STR731FV1,
STR731FV2, STR735FZ1, STR735FZ2, STR736FV0, STR736FV1, STR750FL2, STR750FV0, STR750FV1,
STR750FV2, STR751FR0, STR751FR1, STR751FR2, STR752FR0, STR752FR1, STR752FR2, STR755FR0,
STR755FR1, STR755FR2, STR755FV0, STR755FV1, STR755FV2, STR910FM32, STR910FW32, STR911FM42,
STR911FM44, STR912FW42, STR912FW44, STR10XX, STM32F10xx

Analog Devices (ARM7/ARM9/Cortex-M3 Family)
ADuC7019, ADuC7020, ADuC7021, ADuC7022,
ADuC7024, ADuC7025, ADuC7026, ADuC7027, ADuC7032, ADuC7033, ADuC7128, ADuC7129

Atmel (ARM7/ARM9/Cortex-M3 Family)
AT91C140, AT91F40416, AT91F40816, AT91FR40162,
AT91FR4042, AT91FR4081, AT91M40400, AT91M40800, AT91M40807, AT91M42800A, AT91M43300,
AT91M55800A, AT91M63200, AT91R40008, AT91R40807, AT91RM3400, AT91RM9200, AT91SAM7A1,
AT91SAM7A2, AT91SAM7A3, AT91SAM7S128, AT91SAM7S256, AT91SAM7S32, AT91SAM7S64,
AT91SAM7SE256, AT91SAM7SE32, AT91SAM7SE512, AT91SAM7X128, AT91SAM7X256, AT91SAM7XC128,
AT91SAM7XC256, AT91SAM9260, AT91SAM9261

Freescale Semiconductor (ARM7/ARM9/Cortex-M3 Family)
MAC7101, MAC7104, MAC7105, MAC7106,
MAC7111, MAC7112, MAC7114, MAC7115, MAC7116, MAC7121, MAC7122, MAC7124, MAC7125, MAC7126,
MAC7131, MAC7134, MAC7135, MAC7136, MAC7141, MAC7142, MAC7144

Luminary Micro (ARM7/ARM9/Cortex-M3 Family)
LM3S101, LM3S102, LM3S301, LM3S310, LM3S315,
LM3S316, LM3S328, LM3S601, LM3S610, LM3S611, LM3S612, LM3S613, LM3S615, LM3S628, LM3S801,
LM3S811, LM3S812, LM3S815, LM3S828

NXP (founded by Philips) (ARM7/ARM9/Cortex-M3 Family)
LPC2101, LPC2102, LPC2103, LPC2104,
LPC2105, LPC2106, LPC2114, LPC2119, LPC2124, LPC2129, LPC2131, LPC2132, LPC2134, LPC2136,
LPC2138, LPC2141, LPC2142, LPC2144, LPC2146, LPC2148, LPC2194, LPC2210, LPC2212, LPC2214,
LPC2220, LPC2290, LPC2292, LPC2294, LPC2364, LPC2366, LPC2368, LPC2378, LPC2458, LPC2468,
LPC2880, LPC2888, LPC3180

OKI (ARM7/ARM9/Cortex-M3 Family)
ML674000, ML674001, ML674002, ML674003, ML675001, ML675002,ML675003, ML67Q4050, ML67Q4051, ML67Q4060, ML67Q4061, ML696201, ML69Q6203

Sharp (ARM7/ARM9/Cortex-M3 Family)
LH75400, LH75401, LH75410, LH75411

TI (ARM7/ARM9/Cortex-M3 Family)
TMS470R1A128, TMS470R1A256, TMS470R1A288, TMS470R1A384,
TMS470R1A64, TMS470R1B1M, TMS470R1B512, TMS470R1B768

5. 지원하는 디버그 소프트웨어
(1) IAR( Cortex-M3 코어는 5.11 이상에서 지원)
(2) ADS1.2, KEIL MDK, RVDS 2.0, RVDS 2.2, RVDS 3.0 이상
(3) 그밖의 RDI 인터페이스를 지원하는 모든 디버그 환경

6. 제품 구성

(1) H-JTAG USB 1Ea
(2) USB Cable 1Ea
(3) JTAG 20Pin Cable, JTAG 20Pin 변환 케이블
(4) USB Driver/Software, CD

7. 디바이스 별 사용화면

NXP LPC2210 + SST39VF1601

AT91SAM9260+SST39VF1601： AT91SAM9260 + SST39VF1601 :

H-JTAG USB Pro

1. 제품명

H-JTAG USB Pro

2. 제품소개
H-JTAG USB 제품은 ARM Core(S3C2440, S3C6410, XScale, Cortex-M3)등을 위한 디버깅 및 플래시
프로그램이 가능한 USB JTAG 에뮬레이터 제품 입니다. H-JTAG 의 사용법 및 성능은
MULTI-ICE 제품과 유사하며 SDT2.51, ADS1.2, KEIL RVDS, MDK and IAR(EWARM 5.11 이상) 등과 같은
대부분의 인기 있는 개발 환경에서 ARM7/ARM9/ARM11/Cortex-M3 코어의 디버깅 및 플래시
프로그램을 할 수 있습니다

제품 구매 : http://www.toolparts.co.kr

3. 제품특징
(1) Support RDI 1.5.0 and 1.5.1
(2) Support ARM7, ARM9, ARM11, XSCALE and CORTEX-M3
(3) Support both THUMB and ARM instructions
(4) Support both Little-Endian, Big-Endian
(5) Support SEMIHOSTING
(6) Support 2000/XP/VISTA/Windows 7
(7) USB2.0 고속 인터페이스 및 USB전원 공급
(8) JTAG Clock : 10K ~ 15MHz
(9) JTAG 읽기 및 쓰기속도
    ARM7 : Read - 750KB/sec, Write - 550KB/sec
    ARM9 : Read - 750KB/sec, Write - 520KB/sec
    CORTEX-M3 : Read - 420KB/sec, Write - 340KB/sec

H-JTAG Edition		Light	Standard	Professional
Speed	Download	LPT x 5	750 KB/S	750 KB/S
Speed	Upload	LPT x 5	550 KB/S	550 KB/S
ARM Core	ARM-7	YES	YES	YES
	ARM-9	YES	YES	YES
	CORTEX-M3	YES	YES	YES
	XSCALE	NO	YES	YES
	ARM11	NO	NO	YES
	PXA3XX	NO	NO	YES
Support IDE		ADS1.2, RVDS, KEIL/MDK, IAR
Support OS		WIN2000 / XP / VISTA / WINDOWS 7

4. 지원디바이스

Samsung (ARM7/ARM9/Cortex-M3 Family)
S3C2410A, S3C2440A, S3C44B0X, S3C4510B, S3C6400, S3C641X

XScale (ARM7/ARM9/ARM11 Family)
PXA210, PXA255, PXA270, PXA3XX

STMicroelectronics (ARM7/ARM9/Cortex-M3 Family)
STR710FZ1, STR710FZ2, STR711FR0, STR711FR1, STR711FR2,
STR712FR0, STR712FR1, STR712FR2, STR715FR0, STR730FZ1, STR730FZ2, STR731FV0, STR731FV1,
STR731FV2, STR735FZ1, STR735FZ2, STR736FV0, STR736FV1, STR750FL2, STR750FV0, STR750FV1,
STR750FV2, STR751FR0, STR751FR1, STR751FR2, STR752FR0, STR752FR1, STR752FR2, STR755FR0,
STR755FR1, STR755FR2, STR755FV0, STR755FV1, STR755FV2, STR910FM32, STR910FW32, STR911FM42,
STR911FM44, STR912FW42, STR912FW44, STR10XX, STM32F10xx

Analog Devices (ARM7/ARM9/Cortex-M3 Family)
ADuC7019, ADuC7020, ADuC7021, ADuC7022,
ADuC7024, ADuC7025, ADuC7026, ADuC7027, ADuC7032, ADuC7033, ADuC7128, ADuC7129

Atmel (ARM7/ARM9/Cortex-M3 Family)
AT91C140, AT91F40416, AT91F40816, AT91FR40162,
AT91FR4042, AT91FR4081, AT91M40400, AT91M40800, AT91M40807, AT91M42800A, AT91M43300,
AT91M55800A, AT91M63200, AT91R40008, AT91R40807, AT91RM3400, AT91RM9200, AT91SAM7A1,
AT91SAM7A2, AT91SAM7A3, AT91SAM7S128, AT91SAM7S256, AT91SAM7S32, AT91SAM7S64,
AT91SAM7SE256, AT91SAM7SE32, AT91SAM7SE512, AT91SAM7X128, AT91SAM7X256, AT91SAM7XC128,
AT91SAM7XC256, AT91SAM9260, AT91SAM9261

Freescale Semiconductor (ARM7/ARM9/Cortex-M3 Family)
MAC7101, MAC7104, MAC7105, MAC7106,
MAC7111, MAC7112, MAC7114, MAC7115, MAC7116, MAC7121, MAC7122, MAC7124, MAC7125, MAC7126,
MAC7131, MAC7134, MAC7135, MAC7136, MAC7141, MAC7142, MAC7144

Luminary Micro (ARM7/ARM9/Cortex-M3 Family)
LM3S101, LM3S102, LM3S301, LM3S310, LM3S315,
LM3S316, LM3S328, LM3S601, LM3S610, LM3S611, LM3S612, LM3S613, LM3S615, LM3S628, LM3S801,
LM3S811, LM3S812, LM3S815, LM3S828

NXP (founded by Philips) (ARM7/ARM9/Cortex-M3 Family)
LPC2101, LPC2102, LPC2103, LPC2104,
LPC2105, LPC2106, LPC2114, LPC2119, LPC2124, LPC2129, LPC2131, LPC2132, LPC2134, LPC2136,
LPC2138, LPC2141, LPC2142, LPC2144, LPC2146, LPC2148, LPC2194, LPC2210, LPC2212, LPC2214,
LPC2220, LPC2290, LPC2292, LPC2294, LPC2364, LPC2366, LPC2368, LPC2378, LPC2458, LPC2468,
LPC2880, LPC2888, LPC3180

OKI (ARM7/ARM9/Cortex-M3 Family)
ML674000, ML674001, ML674002, ML674003, ML675001, ML675002,ML675003, ML67Q4050, ML67Q4051, ML67Q4060, ML67Q4061, ML696201, ML69Q6203

Sharp (ARM7/ARM9/Cortex-M3 Family)
LH75400, LH75401, LH75410, LH75411

TI (ARM7/ARM9/Cortex-M3 Family)
TMS470R1A128, TMS470R1A256, TMS470R1A288, TMS470R1A384,
TMS470R1A64, TMS470R1B1M, TMS470R1B512, TMS470R1B768

5. 지원하는 디버그 소프트웨어
(1) IAR( Cortex-M3 코어는 5.11 이상에서 지원)
(2) ADS1.2, KEIL MDK, RVDS 2.0, RVDS 2.2, RVDS 3.0 이상
(3) 그밖의 RDI 인터페이스를 지원하는 모든 디버그 환경

6. 제품 구성

(1) H-JTAG USB 1Ea
(2) USB Cable 1Ea
(3) JTAG 20Pin Cable, JTAG 20Pin 변환 케이블
(4) USB Driver/Software, CD

7. 디바이스 별 사용화면

NXP LPC2210 + SST39VF1601

AT91SAM9260+SST39VF1601： AT91SAM9260 + SST39VF1601 :

H-JTAG USB Light

1. 제품명

H-JTAG USB Light

2. 제품소개
H-JTAG USB 제품은 ARM Core(S3C2440, XScale, Cortex-M3)등을 위한 디버깅 및 플래시
프로그램이 가능한 USB JTAG 에뮬레이터 제품 입니다. H-JTAG 의 사용법 및 성능은
MULTI-ICE 제품과 유사하며 SDT2.51, ADS1.2, KEIL RVDS, MDK and IAR(EWARM 5.11 이상) 등과 같은
대부분의 인기 있는 개발 환경에서 ARM7/ARM9/Cortex-M3 코어의 디버깅 및 플래시
프로그램을 할 수 있습니다

제품 구매 : http://www.toolparts.co.kr

3. 제품특징
(1) Support RDI 1.5.0 and 1.5.1
(2) Support ARM7, ARM9, ARM11, XSCALE and CORTEX-M3
(3) Support both THUMB and ARM instructions
(4) Support both Little-Endian, Big-Endian
(5) Support SEMIHOSTING
(6) Support 2000/XP/VISTA/Windows 7
(7) USB2.0 고속 인터페이스 및 USB전원 공급
(8) JTAG Clock : 10K ~ 15MHz
(9) JTAG 읽기 및 쓰기속도
    ARM7 : Read - 750KB/sec, Write - 550KB/sec
    ARM9 : Read - 750KB/sec, Write - 520KB/sec
    CORTEX-M3 : Read - 420KB/sec, Write - 340KB/sec

H-JTAG Edition		Light	Standard	Professional
Speed	Download	LPT x 5	750 KB/S	750 KB/S
Speed	Upload	LPT x 5	550 KB/S	550 KB/S
ARM Core	ARM-7	YES	YES	YES
	ARM-9	YES	YES	YES
	CORTEX-M3	YES	YES	YES
	XSCALE	NO	YES	YES
	ARM11	NO	NO	YES
	PXA3XX	NO	NO	YES
Support IDE		ADS1.2, RVDS, KEIL/MDK, IAR
Support OS		WIN2000 / XP / VISTA / WINDOWS 7

S3C2440 Mini VGA Board V2

1. 제품명

S3C2440 Mini VGA Board V2

2. 제품소개
ARM9 Core를 내장한 삼성(Samsung)전자의 S3C2440 MCU를 탑재 하였고
1024x768@70Hz VGA conversion board 를 포함하고 있습니다. Windows CE 5.0, CE 6.0 BSP 소스 및
Linux 2.6.13 커널의 전체 BSP소스 코드를 포함 하고 있고 모든 장치 드라이버 소스 또한 포함 되어 있습니다.

3. 제품사양

Core Board specification
CPU	Samsung S3C2440 400MHz(ARM920T core, Up to 532MHz)
SDRAM	64Mbyte SDRAM, 32bits Data Bus width 100MHz Clock
Flash	128Mbyte Nand Flash 2Mbyte Nor Flash(BIOS installed)
LCD	1024x768@70Hz VGA conversion board
USB Port	USB 1.1 Host 1 Port, Device 1 Port
Audio	1 Stereo audio out, 1 Mic In
LAN	10M/100M Ethernet interface 1 Port (RJ-45 interface) DM9000
SD/MMC	SD card interface and holder
Camera	20 Pin camera Interface(Camera module은 별도판매.)
Wi-Fi	USB Wi-Fi 모듈 별도 판매
UART	1 RS232 serial port, 3 serial ports available through 14pin (2.0mm space) interface
JTAG	Standard 20Pin JTAG interface
Buttons	4 Test buttons
LED	4 Status LEDs
I2C bus	AT24C08
AD input	AD input test
Audio	Stereo Audio out, Microphone In, PWM Beep
RTC	RTC (battery backed)
Expansion	34pin GPIO expansion connector 44 pin System bus expansion connector
Power Supply	+5V DC
Dimensions	120x100 mm

* About 1024x768@70Hz VGA conversion board
- FPGA + SDRAM-based programs to achieve, by the FPGA to control the clock, the field
  scanning, it definitely does not flash
- Linux, Wince 5.0, uCos2 test source code
- You need to know:?
  We do not use DA converter chips, but according to the required VGA display timing, the
  use of FPGA + SDRAM way, this can make full use of 2410 / 2440 itself has a function of
  the LCD Controller to achieve greater output resolution. VGA extension because in fact,
  borrowed from the 2440's LCD controller functions, so it is the driver how to set up
  these registers, which is an ordinary TFT LCD drivers are similar.?

* VGA driver source code of the location in the system :?
- Linux Kernel
  kernel-2.6.13/arch/arm/mach-s3c2410/mach-qq2440.c in the keyword
  "VGA1024768" part of the set, which in the past, as well as the core of the kernel mini2440 had existed for a long time .

- Win CE 5.0 BSP
  smdk2440/inc/s2440.h in the keyword "LCD_TYPE_VGA1024x768" part of the set.

- uCos2 OS
  uCos2/S3C2440/source/lcd.c in the keyword "LCD_TYPE_VGA1024x768" part of the set.

- Firmware Bare-metal test code
  2440test/src/LCD_VGA_1024x768.c

* Software feature

Windows CE 5.0 and 6.0 System
Boot	Nboot, Eboot
Driver support	1. Display driver 2. Audio driver 3. Ethernet Driver, USB WIFI Driver(Install file) 4. USB Slave, Host driver 5. RTC (Real Time Clock) driver 6. NandFlash driver 7. Serial driver 8. EINT driver 9. LED driver 10. SD/MMC driver

Linux 2.6.13
Kernel	Linux kernel 2.6.13 ROM/CRAM/EXT2/FAT32/NFS file system YAFFS file system
Driver support	1. System Interrupt & Timer driver 2. Serial device driver 3. Block memory device driver 4. Flash memory device driver 5. Ethernet device driver 6. RTC (Real Time Clock) Driver 7. USB Host driver 8. USB Slave 9. LEDS, Buttons Driver 10. Many Country Language Support 11. LCD & Touch driver 12. MMC/SD card driver 13. Audio driver 14. USB HID(Mouse, Keyboard) driver 15. Camera driver(V9650 1.3M)
GUI	QT/EMBEDDED

DVD #1 Directory contents
DataSheet	제품에서 사용된 모든 칩의 데이터 시트
Firmware	개발보드 펌 웨어 소스 LCD, Camera, Key, RTC, LED 등
Images	Linux, CE 5.0, uCOS2, BootLoader Binary
Linux	Linux example
linux source	Linux BSP 소스
LinuxPDFBooks	Linux Device Driver EBOOK
Manual	보드 사용자 매뉴얼
Manual Video	CE 5.0, Linux, QTopia 등 포팅 동영상 매뉴얼
OpenSourceBootloader	Boot Loader 소스
Photo Mini2440	제품 이미지 사진
Schematic	개발보드 회로도
uCos2	uCos2 포팅 소스
Windows Tools	DNW, Image2Hex, USB Driver 등 윈도 도구 들
WindowsCE 5.0 BSP	CE 5.0 BSP 소스
WindowsCE 6.0 BSP	CE 6.0 BSP 소스
WindowsCE Wireless Driver	802.11b/g USB Wi-Fi module CE Driver

4. Accessaries
(1) OV9650 1.3 mega pixels CMOS camera module.
(2) VIA VT6656 802.11b/g USB Wi-Fi module.
(3) Debugger( ARM7, ARM9, Cortex-M3용) 지원 : H-JTAG USB (별도구매)

5. 제품 구성

(1) Parallel Wiggler Emulator (Work with H-JTAG Proxy Server, Support RDI Interface)
병렬 포트를 통해서 Flash Write를 할 수 있는 JTAG Adapter 입니다.
디버깅은 되지 않습니다.
(2) S3C2440 VGA
(3) Serial Cable
(4) RJ-45 Cable( LAN Cable )
(5) USB Cable( AB Type )
(6) 5V Power Adapter
(7) 소스 및 회로도, 데이터시트 DVD ROM

S3C2440 Mini Board Pro + 7인치 터치 LCD

1. 제품명

S3C2440 Mini Board Pro + 7인치 터치 LCD

2. 제품소개
S3C2440 Core Board와 Mother Board, 7인치 터치 LCD를 탑재한 개발 보드 입니다. Windows CE 5.0 BSP 소스 및
Linux 2.6.13 커널의 전체 BSP소스 코드를 포함 하고 있습니다. 또한 GPS, Camera, VGA Out, AV, HUB등 다양한 주변
모듈을 가지고 있습니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품사양

Core Board specification
CPU	Samsung S3C2440A ARM920T core
SRAM	32bit,100MHz, default mounted 64MB SDRAM, it can be replaced into 128MB
NAND Flash	Default mounted 64MB, it can be replaced into 128MB to 1GB
NOR Flash	2 Mbytes, bootable. It can be replaced into 8MB
Core-Power	1.25V Kernel Voltage
Power	3.3V power supply for CPU board
Connector	DC-2.0mm pitch board-to-board connectors
Dimension	37mmx74mm

Mother Board specification
Serial Ports (UARTs)	COM-0 - RS232, five-wire DB9 RS232 serial port COM-1 - RS232, three-wire available via 2mm pitch 3 pins COM-2 - RS232, three-wire available via 2mm pitch 3 pins
LCD	The LCD port integrated 4-wire resistor touch screen port. The board comes with driver for 3.5inch,4.3inch, 7inch and 10.4inch TFT LCD (the resolution is 800x600) *제품에는 7인치 터치 TFT LCD(800480) 가 포함되어 있습니다.**
Ethernet	Davicom DM9000A MAC & PHY, 10/100BaseT, Activity LED's
USB	USB1 Host, 12 Mbps ,USB2 Device,12 Mbps
Camera	2mm pitch 20-pin,130 Mega pixels CMOS camera interface
JTAG	One 2.0mm, 10-Pin Jtag interface Can be upgrade software via USB. 패러럴 JTAG Board 포함
Keyboard & mouse	USB, keypad is working via USB
Audio codec	Adopt UDA1341 Audio chip, Audio input and output slot
ADC	Adjustable resistor is connected with pins of ADC to check analog/digital change
RTC	Real Time Clock, powered by external lithium battery
Buzzer	On-board PWM function test unit
Device support	1 x SD/MMC card socket, Supports Multimedia Card, Secure Digital and Secure Digital I/O communications protocols up to 2GB
General Purpose I/O	A 40-pin GPIO Expansion Connector
BUS	A 40-pin BUS extended interface
LEDs	4 x Status LEDs
Buttons	4 Programmable User Buttons
AV Monitor Module	AV모듈(SAA7113), CCD카메라 구매는 별도문의(master@deviceshop.net)
VGA Out	VGA Out 구매는 별도문의(master@deviceshop.net)
GPS Module	GPS 모듈, S/W 구매는 별도문의(master@deviceshop.net)
USB HUB Module	3 x USB Host + 2 x RS232 Serial Port + USB Converted SD Card Module 구매는 별도문의(master@deviceshop.net)
Dimension	105x128mm

* Mother Board 사양

* CPU Board 사양

4. Software 사양

Linux drivers support ( 2.6.28 )
Boot	Boot	Start up system, version u-boot-1.1.6
	Tftp	Support tftp transmitting protocol
	File system	Support writing yaffs file system image into Nand flash
	Kernel	Support writing kernel image into nand flash and kernel parameter setting
	Etc	Support via USB and Serial Interface to download application to flash debug
Kernel	Version	Linux kernel 2.6.25.8
	File system	CRAMFS/RAMFS/EXT2/FAT32/NFS/YAFFS/YAFFS2
	Serial device	Three serial ports
	10/100M Ethernet	DM9000
	RTC	RTC driver
	USB Host	USB Host ,USB Slave driver
	LEDs	Four LEDs driver
	Buttons	User buttons
	Language	Multi-language Support
	LCD	Coming with driver for 3.5inch,4.3inch,7inch and 10.4inch TFT LCD (resolution 800*600)
	Touch panel	Touch panel driver
	SD/MMC card	SD/MMC card driver
	Sound	UDA1341
	CMOS Camera	CMOS Camera driver
	USB Camera	The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the LCD
GUI	Qt/Embedded	Qtopia 1.7.0 and Qtopia 2.2.0

Windows CE ( 5.0 )
Boot	Stepldr	Copy Eboot to SDRAM to jump to Eboot
Boot	Eboot	Ethernet bootloader for wince, support downloading image through USB device port. supporting one Key to update Bootloader, Kernel, Yaffs, NK.bin and one Key to configure parameters of Linux
Driver	Serial device	Three serial ports
	10M/100M Ethernet	DM9000
	USB Host	USB Host driver, supporting USB ActiveSync
	USB Device	USB Device driver
	RTC	Real time keeping
	Buttons	User buttons
	LCD	Coming with driver for 3.5inch,4.3inch,7inch and 10.4inch TFT LCD (resolution 800x600)
	USB Camera	The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the LCD
	USB WIFI	Support Via USB WIFI module
	ADC	ADC driver
	Touch Screen	Touch Screen driver
	Audio	UDA1341
	SD/MMC card	Block devices drivers
	Others	Support MediaPlayer, IE browser, saving Register change, MFC ,NET2.0 and so on.

DVD #1 Directory contents
bootloader	u-boot 1.1.6와 ADS 1.2 자체 bootloader
Data Sheet	주요 부품에 대한 모든 데이터 시트
TestProgram	모든 주변 장치에 대한 Non OS 테스트 프로그램( Firmware)
Image	미리 컴파일 된 모든 S/W에 대한 이미지
Linux	리눅스 BSP 소스, 크로스 컴파일러
Schematics	PDF회로도, PCB 심볼
uCOS-II	uCOS-II 포팅 소스( ADS 1.2)
User Manual	PDF 매뉴얼
WinCE Source	Windows CE 5.0 BSP 소스
Windows Software Package	DNW, H-JTAG 등 Windows tools

5. Accessaries
(1) OV9650 1.3 mega pixels CMOS camera module.( Optional )
(2) GPS 모듈 ( Optional )
(3) VGA Out 모듈 ( Optional )
(4) SAA7113 AV Converter 모듈, CCD 카메라 ( Optional )
(5) 2Serial, 4 USB Host, USB SD Slot USB HUB 모듈 ( Optional )
(6) Debugger( ARM7, ARM9, Cortex-M3용) 지원 : H-JTAG USB (별도구매)

6. 제품 구성
(1) One Mini2440 Pro Single board computer ( Core Board, 7인치 터치 LCD 포함 )
(2) One CD-ROM (WinCE 5.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
(3) One Ethernet crossover cable
(4) One Serial Cable
(5) One Wiggler Board ( 패러럴 JTAG Board )
(6) One USB Cable
(7) One 5V/2A DC power supply
(8) One Touch pen

S3C2440 Mini Board Pro + 3.5인치 터치 LCD

1. 제품명

S3C2440 Mini Board Pro + 3.5인치 터치 LCD

2. 제품소개
S3C2440 Core Board와 Mother Board, 3.5인치 터치 LCD를 탑재한 개발 보드 입니다. Windows CE 5.0 BSP 소스 및
Linux 2.6.13 커널의 전체 BSP소스 코드를 포함 하고 있습니다. 또한 GPS, Camera, VGA Out, AV, HUB등 다양한 주변
모듈을 가지고 있습니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품사양

Core Board specification
CPU	Samsung S3C2440A ARM920T core
SRAM	32bit,100MHz, default mounted 64MB SDRAM, it can be replaced into 128MB
NAND Flash	Default mounted 64MB, it can be replaced into 128MB to 1GB
NOR Flash	2 Mbytes, bootable. It can be replaced into 8MB
Core-Power	1.25V Kernel Voltage
Power	3.3V power supply for CPU board
Connector	DC-2.0mm pitch board-to-board connectors
Dimension	37mmx74mm

Mother Board specification
Serial Ports (UARTs)	COM-0 - RS232, five-wire DB9 RS232 serial port COM-1 - RS232, three-wire available via 2mm pitch 3 pins COM-2 - RS232, three-wire available via 2mm pitch 3 pins
LCD	The LCD port integrated 4-wire resistor touch screen port. The board comes with driver for 3.5inch,4.3inch, 7inch and 10.4inch TFT LCD (the resolution is 800x600) *제품에는 3.5인치 터치 TFT LCD(320240) 가 포함되어 있습니다.**
Ethernet	Davicom DM9000A MAC & PHY, 10/100BaseT, Activity LED's
USB	USB1 Host, 12 Mbps ,USB2 Device,12 Mbps
Camera	2mm pitch 20-pin,130 Mega pixels CMOS camera interface
JTAG	One 2.0mm, 10-Pin Jtag interface Can be upgrade software via USB. 패러럴 JTAG Board 포함
Keyboard & mouse	USB, keypad is working via USB
Audio codec	Adopt UDA1341 Audio chip, Audio input and output slot
ADC	Adjustable resistor is connected with pins of ADC to check analog/digital change
RTC	Real Time Clock, powered by external lithium battery
Buzzer	On-board PWM function test unit
Device support	1 x SD/MMC card socket, Supports Multimedia Card, Secure Digital and Secure Digital I/O communications protocols up to 2GB
General Purpose I/O	A 40-pin GPIO Expansion Connector
BUS	A 40-pin BUS extended interface
LEDs	4 x Status LEDs
Buttons	4 Programmable User Buttons
AV Monitor Module	AV모듈(SAA7113), CCD카메라 구매는 별도문의(master@deviceshop.net)
VGA Out	VGA Out 구매는 별도문의(master@deviceshop.net)
GPS Module	GPS 모듈, S/W 구매는 별도문의(master@deviceshop.net)
USB HUB Module	3 x USB Host + 2 x RS232 Serial Port + USB Converted SD Card Module 구매는 별도문의(master@deviceshop.net)
Dimension	105x128mm

* Mother Board 사양

* CPU Board 사양

4. Software 사양

Linux drivers support ( 2.6.28 )
Boot	Boot	Start up system, version u-boot-1.1.6
	Tftp	Support tftp transmitting protocol
	File system	Support writing yaffs file system image into Nand flash
	Kernel	Support writing kernel image into nand flash and kernel parameter setting
	Etc	Support via USB and Serial Interface to download application to flash debug
Kernel	Version	Linux kernel 2.6.25.8
	File system	CRAMFS/RAMFS/EXT2/FAT32/NFS/YAFFS/YAFFS2
	Serial device	Three serial ports
	10/100M Ethernet	DM9000
	RTC	RTC driver
	USB Host	USB Host ,USB Slave driver
	LEDs	Four LEDs driver
	Buttons	User buttons
	Language	Multi-language Support
	LCD	Coming with driver for 3.5inch,4.3inch,7inch and 10.4inch TFT LCD (resolution 800*600)
	Touch panel	Touch panel driver
	SD/MMC card	SD/MMC card driver
	Sound	UDA1341
	CMOS Camera	CMOS Camera driver
	USB Camera	The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the LCD
GUI	Qt/Embedded	Qtopia 1.7.0 and Qtopia 2.2.0

Windows CE ( 5.0 )
Boot	Stepldr	Copy Eboot to SDRAM to jump to Eboot
Boot	Eboot	Ethernet bootloader for wince, support downloading image through USB device port. supporting one Key to update Bootloader, Kernel, Yaffs, NK.bin and one Key to configure parameters of Linux
Driver	Serial device	Three serial ports
	10M/100M Ethernet	DM9000
	USB Host	USB Host driver, supporting USB ActiveSync
	USB Device	USB Device driver
	RTC	Real time keeping
	Buttons	User buttons
	LCD	Coming with driver for 3.5inch,4.3inch,7inch and 10.4inch TFT LCD (resolution 800x600)
	USB Camera	The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the LCD
	USB WIFI	Support Via USB WIFI module
	ADC	ADC driver
	Touch Screen	Touch Screen driver
	Audio	UDA1341
	SD/MMC card	Block devices drivers
	Others	Support MediaPlayer, IE browser, saving Register change, MFC ,NET2.0 and so on.

DVD #1 Directory contents
bootloader	u-boot 1.1.6와 ADS 1.2 자체 bootloader
Data Sheet	주요 부품에 대한 모든 데이터 시트
TestProgram	모든 주변 장치에 대한 Non OS 테스트 프로그램( Firmware)
Image	미리 컴파일 된 모든 S/W에 대한 이미지
Linux	리눅스 BSP 소스, 크로스 컴파일러
Schematics	PDF회로도, PCB 심볼
uCOS-II	uCOS-II 포팅 소스( ADS 1.2)
User Manual	PDF 매뉴얼
WinCE Source	Windows CE 5.0 BSP 소스
Windows Software Package	DNW, H-JTAG 등 Windows tools

5. Accessaries
(1) OV9650 1.3 mega pixels CMOS camera module.( Optional )
(2) GPS 모듈 ( Optional )
(3) VGA Out 모듈 ( Optional )
(4) SAA7113 AV Converter 모듈, CCD 카메라 ( Optional )
(5) 2Serial, 4 USB Host, USB SD Slot USB HUB 모듈 ( Optional )
(6) Debugger( ARM7, ARM9, Cortex-M3용) 지원 : H-JTAG USB (별도구매)

6. 제품 구성
(1) One Mini2440 Pro Single board computer ( Core Board, 3.5인치 터치 LCD 포함 )
(2) One CD-ROM (WinCE 5.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
(3) One Ethernet crossover cable
(4) One Serial Cable
(5) One Wiggler Board ( 패러럴 JTAG Board )
(6) One USB Cable
(7) One 5V/2A DC power supply
(8) One Touch pen

S3C2440 Mini Board V2 + 7인치 터치 LCD

1. 제품명

S3C2440 Mini Board V2 + 7인치 터치 LCD

2. 제품소개

ARM9 Core를 내장한 삼성(Samsung)전자의 S3C2440 MCU를 탑재 하였고 7인치 터치 LCD(800x480)를 포함하고 있습니다. Windows CE 5.0과 CE 6.0 BSP 소스 및 Linux 2.6.13 커널의
전체 BSP소스 코드를 포함 하고 있고 모든 장치 드라이버 소스 또한 포함 되어 있습니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품사양

Core Board specification
CPU	Samsung S3C2440 400MHz(ARM920T core, Up to 532MHz)
SDRAM	64Mbyte SDRAM, 32bits Data Bus width 100MHz Clock
Flash	128Mbyte Nand Flash 2Mbyte Nor Flash(BIOS installed)
LCD	AT070TN83 26K colors / 800*480 / 7 inches TFT Touch LCD
USB Port	USB 1.1 Host 1 Port, Device 1 Port
Audio	1 Stereo audio out, 1 Mic In
LAN	10M/100M Ethernet interface 1 Port (RJ-45 interface) DM9000
SD/MMC	SD card interface and holder
Camera	20 Pin camera Interface(Camera module은 별도판매.)
Wi-Fi	USB Wi-Fi 모듈 별도 판매
UART	1 RS232 serial port, 3 serial ports available through 14pin (2.0mm space) interface
JTAG	Standard 20Pin JTAG interface
Buttons	4 Test buttons
LED	4 Status LEDs
I2C bus	AT24C08
AD input	AD input test
Audio	Stereo Audio out, Microphone In, PWM Beep
RTC	RTC (battery backed)
Expansion	34pin GPIO expansion connector 44 pin System bus expansion connector
Power Supply	+5V DC
Dimensions	120x100 mm

* About 7-inch LCD screen?
- Model: AT070TN83
- Manufacturers: Innolux
- Resolution: 800x480
- Backlight: LED backlight
- Color RGB: 6-6-6 (26K colors)
- Visual regional dimensions: 152.4 X 91.44 mm
- Contour Dimensions: 165X104X5.5 (mm)

* Software feature

Windows CE 5.0 and 6.0 System
Boot	Nboot, Eboot
Driver support	1. Display driver 2. Audio driver 3. Ethernet Driver, USB WIFI Driver(Install file) 4. USB Slave, Host driver 5. RTC (Real Time Clock) driver 6. NandFlash driver 7. Serial driver 8. EINT driver 9. LED driver 10. SD/MMC driver

Linux 2.6.13
Kernel	Linux kernel 2.6.13 ROM/CRAM/EXT2/FAT32/NFS file system YAFFS file system
Driver support	1. System Interrupt & Timer driver 2. Serial device driver 3. Block memory device driver 4. Flash memory device driver 5. Ethernet device driver 6. RTC (Real Time Clock) Driver 7. USB Host driver 8. USB Slave 9. LEDS, Buttons Driver 10. Many Country Language Support 11. LCD & Touch driver 12. MMC/SD card driver 13. Audio driver 14. USB HID(Mouse, Keyboard) driver 15. Camera driver(V9650 1.3M)
GUI	QT/EMBEDDED

DVD #1 Directory contents
DataSheet	제품에서 사용된 모든 칩의 데이터 시트
Firmware	개발보드 펌 웨어 소스 LCD, Camera, Key, RTC, LED 등
Images	Linux, CE 5.0, uCOS2, BootLoader Binary
Linux	Linux example
linux source	Linux BSP 소스
LinuxPDFBooks	Linux Device Driver EBOOK
Manual	보드 사용자 매뉴얼
Manual Video	CE 5.0, Linux, QTopia 등 포팅 동영상 매뉴얼
OpenSourceBootloader	Boot Loader 소스
Photo Mini2440	제품 이미지 사진
Schematic	개발보드 회로도
uCos2	uCos2 포팅 소스
Windows Tools	DNW, Image2Hex, USB Driver 등 윈도 도구 들
WindowsCE 5.0 BSP	CE 5.0 BSP 소스
WindowsCE 6.0 BSP	CE 6.0 BSP 소스
WindowsCE Wireless Driver	802.11b/g USB Wi-Fi module CE Driver

(1) Parallel Wiggler Emulator (Work with H-JTAG Proxy Server, Support RDI Interface)
병렬 포트를 통해서 Flash Write를 할 수 있는 JTAG Adapter 입니다.
디버깅은 되지 않습니다.
(2) AT070TN83 7" 800*480 TFT LCD with touch screen and Cables.
(3) Touch Pen.
(4) S3C2440 board
(5) Serial Cable
(6) RJ-45 Cable( LAN Cable )
(7) USB Cable( AB Type )
(8) 5V Power Adapter
(9) 소스 및 회로도, 데이터시트 DVD ROM

S3C2440 Mini Board V2 + 3.5인치 터치 LCD

1. 제품명

S3C2440 Mini Board V2 + 3.5인치 터치 LCD

2. 제품소개
ARM9 Core를 내장한 삼성(Samsung)전자의 S3C2440 MCU를 탑재 하였고 3.5인치 터치 LCD(240x320)를
포함하고 있습니다. Windows CE 5.0과 CE 6.0 BSP 소스 및 Linux 2.6.13 커널의 전체 BSP소스 코드를
포함 하고 있고 모든 장치 드라이버 소스 또한 포함 되어 있습니다.

제품 구매 : http://www.toolparts.co.kr

3. 제품사양

Core Board specification
CPU	Samsung S3C2440 400MHz(ARM920T core, Up to 532MHz)
SDRAM	64Mbyte SDRAM, 32bits Data Bus width 100MHz Clock
Flash	128Mbyte Nand Flash 2Mbyte Nor Flash(BIOS installed)
LCD	NEC 256K color 320*240/3.5 inches TFT Touch LCD
USB Port	USB 1.1 Host 1 Port, Device 1 Port
Audio	1 Stereo audio out, 1 Mic In
LAN	10M/100M Ethernet interface 1 Port (RJ-45 interface) DM9000
SD/MMC	SD card interface and holder
Camera	20 Pin camera Interface(Camera module은 별도판매.)
Wi-Fi	USB Wi-Fi 모듈 별도 판매
UART	1 RS232 serial port, 3 serial ports available through 14pin (2.0mm space) interface
JTAG	Standard 20Pin JTAG interface
Buttons	4 Test buttons
LED	4 Status LEDs
I2C bus	AT24C08
AD input	AD input test
Audio	Stereo Audio out, Microphone In, PWM Beep
RTC	RTC (battery backed)
Expansion	34pin GPIO expansion connector 44 pin System bus expansion connector
Power Supply	+5V DC
Dimensions	120x100 mm

* Software feature

Windows CE 5.0 and 6.0 System
Boot	Nboot, Eboot
Driver support	1. Display driver 2. Audio driver 3. Ethernet Driver, USB WIFI Driver(Install file) 4. USB Slave, Host driver 5. RTC (Real Time Clock) driver 6. NandFlash driver 7. Serial driver 8. EINT driver 9. LED driver 10. SD/MMC driver

Linux 2.6.13
Kernel	Linux kernel 2.6.13 ROM/CRAM/EXT2/FAT32/NFS file system YAFFS file system
Driver support	1. System Interrupt & Timer driver 2. Serial device driver 3. Block memory device driver 4. Flash memory device driver 5. Ethernet device driver 6. RTC (Real Time Clock) Driver 7. USB Host driver 8. USB Slave 9. LEDS, Buttons Driver 10. Many Country Language Support 11. LCD & Touch driver 12. MMC/SD card driver 13. Audio driver 14. USB HID(Mouse, Keyboard) driver 15. Camera driver(V9650 1.3M)
GUI	QT/EMBEDDED

DVD #1 Directory contents
DataSheet	제품에서 사용된 모든 칩의 데이터 시트
Firmware	개발보드 펌 웨어 소스 LCD, Camera, Key, RTC, LED 등
Images	Linux, CE 5.0, uCOS2, BootLoader Binary
Linux	Linux example
linux source	Linux BSP 소스
LinuxPDFBooks	Linux Device Driver EBOOK
Manual	보드 사용자 매뉴얼
Manual Video	CE 5.0, Linux, QTopia 등 포팅 동영상 매뉴얼
OpenSourceBootloader	Boot Loader 소스
Photo Mini2440	제품 이미지 사진
Schematic	개발보드 회로도
uCos2	uCos2 포팅 소스
Windows Tools	DNW, Image2Hex, USB Driver 등 윈도 도구 들
WindowsCE 5.0 BSP	CE 5.0 BSP 소스
WindowsCE 6.0 BSP	CE 6.0 BSP 소스
WindowsCE Wireless Driver	802.11b/g USB Wi-Fi module CE Driver

(1) Parallel Wiggler Emulator (Work with H-JTAG Proxy Server, Support RDI Interface)
병렬 포트를 통해서 Flash Write를 할 수 있는 JTAG Adapter 입니다.
디버깅은 되지 않습니다.
(2) NEC 256K color 320*240/3.5 inches TFT Touch LCD
(3) Touch Pen.
(4) S3C2440 board
(5) Serial Cable
(6) RJ-45 Cable( LAN Cable )
(7) USB Cable( AB Type )
(8) 5V Power Adapter
(9) 소스 및 회로도, 데이터시트 DVD ROM